U702 Series
Product Features
Fabricated of #18 gauge stainless steel with #4 satin finish
Mitered corners are ground and polished smooth
Multiple reflective surfaces available
Mirror comes with a 15 year warranty against silver spoilage
Mirror surface angle can be changed using adjustable arms
Product Specs
Frame: Fabricated of #18 ga stainless steel, #4 satin finish. 3/4” x 3/4” frame with welded mitered corners are ground and polished smooth. #22 ga concealed “Z” channel is spot welded to inner perimeter of frame for reinforcement and greater rigidity.
Mirror: 1/4" thick type 1 transparent flat type, class 1 - clear glass mirrors. Mirror is coated with one layer of silver and sealed with a uniform electrolyic copper plating. Two coats of mirror paint are appied for added protection. Mirrors are guaranteed against silver spoilage for a period of 15 years. Mirrors conform to AS™ C1036.
Filler: 3/16” thick full size, shock absorbing, water resistant, non-abrasive polyethylene padding protects all concealed mirror surfaces.
Hinge: Full length stainless steel piano type hinge mounted on the bottom of the frame.
Back: #20 ga pre-plated galvanized steel.
Adjustable Arms: mirror can be used as a flush mirror or tilt forward up to 7” from wall surface for handicapped application.
Options:
-VC: Safety Glass (Vinyl Clad)
-T: Tempered Glass
-LG: Laminated Glass
-PM: Plastic Acrylic
-8B: #8 Reflective Surface
-LX: Polycarbonite
Standard Sizes Available (W x H): 16”x24”, 16”x30”, 18”x24”, 18”x30” 18”x36”, 24”x30”, 24”x36”
*Mirrors conform to Federal Specifications DD-M-00411b & DD-g-541D.
Mirrors are always ordered Width x Height
Framed mirrors are fabricated to a tolerance of +/- 1/8”.
Installation Instruction
Coordinate installation with architect / contractor for specific mounting location and height for each mirror application. Check all state an local codes for installation requirements. Transfer mounting points to wall surface for bottom hinge. Drill pilot